(A) It shall be unlawful to operate any motor vehicle with a gross vehicle weight rating of 9,000 pounds or less or any motor vehicle registered as a recreational vehicle under this title on any highway of this state unless the motor vehicle is equipped with both a front and rear bumper.
(B) Except as indicated below, maximum bumper heights of such motor vehicles shall be determined by weight category of gross vehicle weight rating (GVWR), measured from a level surface to the highest point of the bottom of the bumper when the vehicle is unloaded and the tires are inflated to the manufacturer's recommended pressure.
(1) Maximum bumper heights are as follows:
Maximum Front Bumper Height (inches) | Maximum Rear Bumper Height (inches) | |
All motor vehicles of the first division (except multipurpose passenger vehicles): | 22 | 22 |
Multipurpose passenger vehicles and all other motor vehicles: | ||
4,500 pounds and under GVWR | 24 | 26 |
4,501 pounds through 7,500 pounds GVWR | 27 | 29 |
7,501 pounds through 9,000 pounds GVWR | 28 | 30 |
(2) It is unlawful to operate upon any highway of this state any vehicle with a front bumper height that exceeds 28 inches or a rear bumper height that exceeds 30 inches, regardless of the GVWR of the vehicle, except those vehicles covered by ILCS Ch. 18b. For any vehicle with bumpers or attaching components which have been modified or altered from the original manufacturer’s design in order to conform with the maximum bumper requirements for this section, the bumper height shall be measured from a level surface to the bottom of the vehicle frame so modified or altered shall be at least 4.5 inches in vertical height and extend no less than the width of the respective wheel tracks outermost distance.
(3) However, nothing in this section shall prevent the installation of bumper guards.
(C) This section shall not apply to street rods, custom vehicles, or motor vehicles designed or modified primarily for off-highway purposes while those vehicles are in tow, or to motorcycles or motor driven cycles, nor to motor vehicles registered as antique vehicles or expanded-use antique vehicles when the original design of those antique vehicles or expanded-use antique vehicles did not include bumpers. The provisions of this section shall not apply to any motor vehicle driven during the first 1000 recorded miles of that vehicle, when that vehicle is owned or operated by a manufacturer, dealer or transporter displaying a special plate or plates as described in ILCS Ch. 625, Act 5, § 3-100 et seq., while that vehicle is: being delivered from the manufacturing or assembly plant directly to the purchasing dealer or distributor, or from one dealership or distributor to another; being moved by the most direct route from one location to another for the purpose of installing special bodies or equipment; or being driven for purposes of demonstration by a prospective buyer with the dealer or his or her agent present in the cab of the vehicle during the demonstration. The dealer shall, prior to the receipt of any deposit made or any contract signed by the buyer to secure the purchase of a vehicle, inform the buyer, by written statement signed by the purchaser to indicate acknowledgment of the contents thereof, of the legal requirements of this section regarding front and rear bumpers if that vehicle is not to be equipped with bumpers at the time of delivery.
(ILCS Ch. 625, Act 5, § 12-608)