(A) Design: Stacking spaces provided for drive-through uses shall be:
1. A minimum of nine feet (9') in width, as measured from any service window to the edge of the driveway, and eighteen feet (18') in length. See figure 11, "Stacking Space Design" and figure 12, "Drive Aisle Width", of this section.
2. Placed in a single line behind the drive-through facility.
3. Located so that, when in use, they do not obstruct ingress/egress to the site and do not obstruct access to required parking or loading spaces.
4. For a car wash, stacking spaces shall begin behind the last vehicle being washed. For all other drive-in uses, stacking spaces shall begin behind the vehicle parked at a last point of service, such as a window.
(B) Required Spaces: Every drive-through facility shall provide a minimum of three (3) stacking spaces per facility, unless otherwise required by table 12, "Required Off Street Parking", in section 6-12-13 of this chapter.
(C) Reduction Of Required Spaces: The number of required stacking spaces may be reduced during the site plan review process if the petitioner presents a study with quantifiable evidence (e.g., comparable information) which demonstrates that a different requirement should be imposed. The approval of a reduced number of stacking spaces shall apply only to the specific business for which the study was conducted. (Ord. 2006-37, 12-21-2006)