(A) No lot may be created that is so narrow or otherwise so irregularly shaped that it would be impracticable to construct on it a building that:
(1) Could be used for purposes that are permissible in that zoning district; and
(2) Could satisfy any applicable setback requirements for that district.
(B) Without limiting the generality of the foregoing standard, the following minimum lot widths are recommended and are deemed presumptively to satisfy the standard set forth in division (A) above. The lot width shall be measured at the building setback line (in no case less than the requirements set forth in § 153.142) and shall be calculated by running a straight line connecting the points at which the said setback line intersects with lot boundary lines at opposite sides of the lot.
Zone | Lot Width |
Zone | Lot Width |
A-5 | 200 feet |
C-1 | None |
C-2 | 60 feet |
C-3 | 100 feet first unit; 20 feet each additional unit |
C-4 | 75 feet first unit; 20 feet each additional unit |
I-1 | 100 feet |
I-2 | 100 feet |
R-6, RM-6 | 50 feet first unit; 10 feet each additional unit |
R-8, RM-8 | 60 feet first unit; 10 feet each additional unit |
R-10 | 80 feet first unit |
RM-10 | 80 feet first unit; 10 feet each additional unit |
R-15 | 80 feet |
R-20 | 100 feet |
(Ord. passed 4-9-2013; Ord. 2021-03, passed 6-8-2021)