18.88.050: REVIEW; SITE PLAN PREPARATION:
   A.   Preliminary Site Plan: The site plan shall be prepared to scale, showing accurately and with complete dimensioning all buildings, structures, signs, parking, landscaping, walls or fences, and the points of ingress and egress. In addition, all necessary information to clearly define intended use of the property shall be included.
   B.   Changes: Changes in the approved plan of any item listed under subsection D of this section shall be submitted to the commission for review and approval. This includes changes in parking, landscaping, circulation, signs, lighting, grading, and location of structures.
   C.   Stage Development: If the development is to be carried out in progressive stages, each stage shall be so planned that the requirements and the intent of this title shall be fully complied with at the completion of any stage. Initial construction shall include a food store.
   D.   Final Plans: Final plans are required if the following information is not included on the preliminary plan. Prior to the issuance of a building permit, a final site plan shall be submitted to the commission for review and approval, with the following information:
      1.   Location, arrangement and dimensions of main and accessory buildings;
      2.   Location, arrangement and dimensions of automobile parking space, width of aisles, width of bays, angle of parking;
      3.   Location, arrangement and dimensions of truck loading and unloading spaces and docks, including trash storage areas;
      4.   Location and dimensions of vehicular entrances, exits and drives;
      5.   Location and dimensions of pedestrian entrances, exits, walks and walkways;
      6.   General drainage system;
      7.   Location and materials of walls and fences;
      8.   Landscaping and final grading plan;
      9.   The elevations of main and accessory buildings;
      10.   The location, size, height and orientation of all signs and lights;
      11.   Location and shielding of air conditioners, heating and ventilating equipment. (Ord. 1000 § 24.11(B), 1955)