§ 153.072  LI LIMITED INDUSTRIAL DISTRICT REGULATIONS.
   The following regulations apply to all uses in LI districts:
Minimum lot area:
N/a
Minimum lot width at building line:
50 feet.
Minimum front yard depth:
25 feet.
Minimum setback from second street frontage:
Side street on corner lot: 25 feet.
Rear street on double frontage lot: 25 feet.
Minimum side yard:
7 feet from interior side lot line.
Minimum rear yard:
30 feet from interior rear lot line in, or 1/10 of lot depth, but not less than 10 feet.
Maximum lot coverage:
60%
Maximum structure height:
35 feet when permitted by fire regulations (not applicable to church spires, belfries, cupolas, domes, utility and communication towers, chimneys, flag poles, antennae).
Visibility requirements:
Corner lot: No obstruction between heights of 3 and 10 feet above finished street level within 14 feet of intersection of street rights-of-way lines.
Private drive: No obstruction over height of 30 inches within 10 feet of street.
Off-street parking area and loading area requirements:
See §§ 153.125et seq.
Truck terminal: Paved acceleration and deceleration lanes at least 10 feet wide and 100 feet long are required at entrance and exit of terminal site which must have access to and from major street.
Screening:
See landscaping, supplemental regulations, §§ 153.110et seq.
Planting screen, fence or wall at least 6 feet high is required along all interior lot lines abutting any district not separated by a street, except BI.
Signs:
See §§ 153.140et seq.
Storage:
No open storage of junk or salvage materials is permitted with any use in the district.
Subdivision regulations:
Applicable regulations must be met.
Supplemental regulations:
See §§ 153.090et seq.
 
(Ord. passed - - )