155.3506. BUSINESS PARKING (BP)
A. Purpose
Typical Building Type
A. Purpose
Typical Building Type
The Business Parking (BP) district is established and intended to accommodate open parking lots for the patrons or employees of nearby commercial uses. District standards are intended to protect adjacent residential neighborhoods for parking lot noise, lighting, and traffic hazards.
B. Use Standards
See Appendix A: Consolidated Use Table, and use-specific standards in Article 4: Use Standards.
C. Intensity and Dimensional Standards 1
Lot area, minimum (sq ft)
n/a
Typical Lot Pattern
Lot width, minimum (ft)
n/a
Density, maximum (du/ac)
n/a
Lot coverage, maximum (% of lot area)
n/a
Pervious area, minimum (% of lot area)
n/a
Height, maximum (ft)
n/a
Setback from any public right-of-way , minimum (ft)
10
NOTES: [sq ft = square feet; ft = feet; du/ac = dwelling units/acre]

1. See measurement rules and allowed exceptions/variations in Article 9: Part 4.
Typical Development Configuration
 
   B.   BP District Standards
The following standards apply to developments in BP districts in addition to any applicable standards in this article, Article 4: Use Standards, and Article 5: Development Standards.
      1.   Access and Circulation
   Where a lot fronts on a commercial street and a parallel residential street, no direct vehicular access from the residential street is allowed.
      2.   Fences and Walls
   A wall at least six feet high shall be provided along any property line abutting a residentially zoned property.
(Ord. 2012-64, passed 9-11-12)