A. Purpose | Typical Building Type |
A. Purpose | Typical Building Type | |
The Community Facilities (CF) district is established and intended to accommodate facilities that provide basic services for the benefit and service of population of the community, including
parks
and recreation facilities, libraries, schools, colleges, government offices, health care facilities, places of worship, cemeteries, halfway houses, shelters,
civic centers
, and police, fire, and EMS stations. It also accommodates potable water, sewerage, stormwater management, gas, electric, telephone, cable television, and other public utility uses. | ||
B. Use Standards
| ||
C. Intensity and Dimensional Standards 1 | ||
Lot area, minimum (sq ft) | 20,000 2 |
Typical Lot Pattern |
Lot area, minimum (sq ft) | 20,000 2 | |
Lot width, minimum (ft) | 125 2 | |
Density, maximum (du/ac) | n/a | |
Lot coverage, maximum (% of lot area) | 25 | |
Pervious area, minimum (% of lot area) | 20 | |
Height, maximum (ft) | 60 | |
Front yard setback, minimum (ft) | 25 | |
Street side yard setback, minimum (ft) | 25 | |
Setback from a waterway or canal, minimum (ft) | 15 | |
Interior side yard setback, minimum (ft) | 25 | |
Rear yard setback, minimum (ft) | 25 | |
Dimensional Standards for Accessory Structures | See
Accessory Use
-Specific standards in Article 4: Part 3. | |
NOTES: [sq ft = square feet; ft = feet; du/ac = dwelling units/acre] 1. See measurement rules and allowed exceptions/variations in Article 9: Part 4. 2. Not applicable to parks or utility structures covering no more than 50 sq ft of ground area. | ||
Typical Development Configuration
| ||