(A) (1) Meter sizing for each location shall be at the discretion of the water system. The water system reserves the right to change the size of any meter from time to time when, in its judgment, more efficient service or metering will result. Whenever a meter change results in a lower monthly meter charge, the customer shall be responsible for paying costs of materials and labor for the change.
(2) Any building or group of buildings under common ownership shall be metered by one common meter. Where this is impractical or where special use requirements prevail, multiple meters may be installed at the discretion of the water system.
(‘97 Code, § 54.34)
(B) All services two inches or larger shall be valved at both inlet and outlet of the meter, and shall have a valved and sealed, full sized bypass around the meter to permit repair and testing without service interruption.
(‘97 Code, § 54.35)
(C) All meter pits and vaults shall be constructed and installed to the current specifications of the water system, and at no cost to the water system.
(‘97 Code, § 54.36) (Ord. 31-83, passed 11-7-83; Am. Ord. 20-12, passed 10-16-12; Am. Ord. 11-22, passed 11-1-22) Penalty, see § 10.99