17.16.500   Standards of performance for fossil-fuel fired steam generators.
   As exceptions to 40 CFR 60.40 through 60.47:
      1.   In place of 40 CFR 60.43(a)(2) the following language shall be substituted:
         Three hundred forty nanograms per joule heat input (0.8 pounds per million BTU) derived from solid fossil fuel or solid fossil fuel and wood residue.
      2.   Delete 40 CFR 60.43(b).
      3.   For those persons who obtained an installation permit prior to May 14, 1979 for two or more fuel burning equipment or steam power generating installations, which permitted such persons to comply with the sulfur dioxide emission standards specified in Section 17.16.490 and this section as if such equipment or installations constituted one emission discharge point:
         a.   Those persons shall comply with the applicable sulfur dioxide emission standards in the manner specified in their installation permit.
         b.   The control officer shall incorporate such emission standards into each person's operating permit as an enforceable permit condition.
         c.   In no event shall any one fuel burning equipment or steam power generating installation emit sulfur dioxide in excess of:
            i.   Five hundred twenty nanograms per joule heat input (1.2 pounds per million BTU) for solid fossil fuel or solid fossil fuel and wood residue.
            ii.   Three hundred forty nanograms per joule heat input (0.8 pounds per million BTU) for liquid fossil fuel or liquid fossil fuel and wood residue.
(Ord. 1993-128 § 4 (part), 1993)