(A) No lot classified as residential shall be platted that is less than 60 feet in width and less than 6,000 square feet in area.
(B) No lot classified as business, commercial or industrial shall be platted that is less than 100 feet in width and less than 10,000 square feet in area.
(C) (1) Lot lines. All side lot lines should be at right angles to straight street lines, or radial to curved street lines, unless a variation from this rule will give a better street and lot plan.
(2) Lots with double frontage. Lots with double frontage shall be avoided, but if provided, the corner lots must have sufficient depth so that a reasonable front yard may be provided on both street frontages to protect similar frontages on adjacent lots in each direction.
(3) Corner lots. Corner lots shall have extra width sufficient to permit the maintenance of building lines on both front and side.
(Ord. 7, passed 8-2-1993)