Temporary signs shall be permitted within the various use districts subject to the following conditions:
(a) The type, number, setback, height and area of temporary signs shall be controlled as set forth in Table 1250.33(a) "Temporary Signs":
Within Non-Residential Districts | Number of Signs | Max. Size | Location & Height | Permit Y/N |
Window Sign | unlimited | No more than 25% window coverage on facade | N | |
Wall or Freestanding | unlimited | 48 SF (total) | Freestanding- 5' setback; 8' height. Wall - No higher than eve or parapet | N |
Within Residential Districts | ||||
Freestanding Signs or flags | Unlimited | 48 SF (total) | Freestanding - 5' setback; 8' height. Wall - no higher than eve or parapet. | N |
(b) Corner Clearance: Temporary signs shall not be located within a clear vision zone.
 |
The clear vision zone is intended to provide for unobstructed visibility for vehicles and pedestrians. The clear vision zone is defined in accordance with the above illustrations and contains the area within the dashed lines. Figure 1 shows the dimensional calculations of the clear vision zoned while Figure 2 shows the resulting shape of the clear vision zone.
(c) Projection Into Right-of-Way: No temporary sign shall be located within or above any public right-of-way nor project beyond the property line unless approved by City Council.
(d) Damaged or Unsafe: Any temporary sign found by the Zoning Inspector to be in a torn or damaged condition must be removed by the owner within three (3) days after receipt of notice to do so from the Zoning Inspector. A sign found to be in an unsafe condition shall be removed by the owner within twenty-four (24) hours after verbal notification by the Zoning Inspector.
(e) Moving, Illuminated or Flashing Signs: Moving or illuminated temporary signs shall be prohibited.
(Ord. 103-2017. Passed 12-5-17.)