§ 155.442 INDUSTRIAL-HEAVY (I-H).
   (A)   Purpose. This district is primarily intended to apply to areas surrounded by less intense industrial districts, which because of location, access, transportation, and relation to other industrial areas, can be appropriately utilized for heavier types of industry.
   (B)   Permitted uses. See Table 155.501.
   (C)   Dimensional Standards Table.
Table 155.442.1: Industrial-Heavy (I-H)
Standard
Nonresidential
Table 155.442.1: Industrial-Heavy (I-H)
Standard
Nonresidential
Minimum Lot Area
40,000 square feet
Minimum Lot Size
200 feet in width
Maximum Height
200 feet
Front or Street Side Setback [1,2]
Side Setback [1,2]
Rear Setback [1,2]
Minimum Floor Area
N/A
Note(s):
[1]   No portion of any land utilized for, or building occupied by, a use first permitted in an I-H District shall be located within 300 feet of any residentially zoned property or any property zoned (A, U, A-E, R-R). However, this separation requirement shall not apply to accessory uses which are permissible in I-M or more restricted districts as principal uses.
[2]   Any land, building, or structure utilized for a use first permitted in an I-H District shall be located at least 50 feet from all lot lines. However, this 50 foot setback area may be utilized for accessory uses, building, and structures permitted in an I-M or more restricted district.   
 
   (D)   Additional criteria. The following table shall be for uses which require special exception in Industrial-Heavy (I-H) districts as shown in Table 155.501.
Table 155.442.2: Industrial-Heavy (I-H) Special Exception Standards
Standard
Nonresidential
Table 155.442.2: Industrial-Heavy (I-H) Special Exception Standards
Standard
Nonresidential
Minimum Lot Area
5 acres
Minimum Lot Size
500 feet in width
Maximum Height
200 feet
Front or Street Side Setback [1,2]
Side Setback [1,2]
Rear Setback [1,2]
Minimum Floor Area
N/A
Note(s):
[1]   No portion of any land utilized for, or building occupied by, a use first permitted in an I-H District shall be located within 300 feet of any residentially zoned property or any property zoned in an agriculture zoned district However, this separation requirement shall not apply to accessory uses which are permissible in I-M or more restricted districts as principal uses.
[2]   Any land, building, or structure utilized for a use first permitted in an I-H District shall be located at least 50 feet from all lot lines. However, this 50 foot setback area may be utilized for accessory uses, building, and structures permitted in an I-M or more restricted district.
 
(Ord. 2021-02, adopted 3-17-21; sought to be reconsidered, Commission passed 4-21-2021)
PLANNED DISTRICTS