§ 155.440 INDUSTRIAL-LIGHT (I-L).

   (A)   Purpose. This district is primarily intended to accommodate a wide range of low intensity manufacturing, assembly, processing, distribution, warehousing, research and development, or other low intensity industrial uses.

   (B)   Permitted uses. See Table 155.501.

   (C)   Dimensional Standards Table.

Table 155.440: Industrial-Light (I-L)
Standard	Nonresidential
Minimum Lot Area	N/A
Minimum Lot Dimensions	N/A
Maximum Height	100 feet
Front or Street Side Setback [1,2,3]	§§ 155.630 - 155.633
Side Setback [1,2,3]	§§ 155.630 - 155.633
Rear Setback [1,2,3]	§§ 155.630 - 155.633
Minimum Floor Area	1,500 square feet
Note(s): [1]   No building, structure, or part thereof shall be located within 75 feet of the right-of-way and no direct access shall be permitted from Pines Boulevard to abutting properties. No parking shall be located within 50 feet of the right-of-way line from the main arterial's roads. [2]   Except on a street which separates an I-L District from a residential district, in which case the setback shall be 25 feet, and that area shall be maintained as a planting strip. No direct access shall be permitted from the dividing street to the abutting properties in an I-L District.

 

(Ord. 2021-02, adopted 3-17-21; sought to be reconsidered, Commission passed 4-21-2021)