(A) Purpose. This district is intended primarily to provide for lands which accommodate agricultural production and agricultural support uses.
(C) Dimensional Standards Table.
Standard | Nonresidential | Residential |
Minimum Lot Size | 35,000 square feet and street frontage of 125 feet | 35,000 square feet and street frontage of 125 feet [1] |
Maximum Lot Coverage | 20% for lots less than 1 acre | 25% for lots greater than 1 acre | 20% for lots less than 1 acre | 25% for lots greater than 1 acre |
Maximum Height | 60 feet | 60 feet |
Front Setback | 25 feet | 25 feet |
Side Setback | 25 feet | 25 feet [2] |
Rear Setback | 25 feet | 25 feet |
Street Side Setback | Equivalent to 25% of lot width not to exceed 25 feet | Equivalent to 25% of lot width not to exceed 25 feet |
Minimum Floor Area | N/A | Single-family dwelling: 900 square feet |
Note(s): [1] A lot having a minimum area of 10,000 square feet and a minimum width of 100 feet and platted as a single lot or acquired by the present owner prior to the effective date of this LDC, may be utilized for a single-family dwelling. [2] A side setback for a single-family dwelling shall not be required to exceed 25 feet. Greater setbacks may be required for various uses (See additional design criteria). | ||
(D) Additional criteria.
(1) Setback modifications. The setback requirements specified in division (C) of this section shall be subject to the following:
(a) Setback requirements shall not apply to portions of land or land used for permissible uses, and which do not contain buildings, and which do not contain structures over 20 feet in height.
(b) Where a portion of a tract of land is utilized for a building or buildings as the principal use, the lot of land occupied by those buildings shall be provided with all required setbacks, the measurement of which shall be from the building or buildings.
(Ord. 2021-02, adopted 3-17-21; sought to be reconsidered, Commission passed 4-21-2021)