1309.03 MINIMUM RIGHT-OF-WAY WIDTHS OF STREETS, ALLEYS AND EASEMENTS FOR UTILITIES.
   Note: See drawings in Appendices A and B.
   (a)    Flatland Subdivisions. The following requirements are applicable to all flatland subdivisions within the jurisdiction of the City Development Department:
      (1)    Arterial highways: as designated by the Thoroughfare Plan, but not less than eighty feet wide in any case.
      (2)    Collector or secondary highways: as designated by the Thoroughfare Plan, but not less than sixty feet wide in any case.
      (3)    Local streets: fifty feet wide.
      (4)    Minor streets and dead-end streets: forty feet wide. All dead-end streets shall terminate in a circular turn-around having a minimum right-of-way diameter of sixty feet, unless the Department approves a "T" or "Y" shaped, paved space in place of the required turning circle.
      (5)    Alleys and service drives: twenty feet wide.
      (6)    Easements for utilities: where required, shall be at least fifteen feet wide and centered on rear or side lot lines.
   (b)    Hillside Subdivisions. The following requirements are applicable to all hillside subdivisions within the jurisdiction of the Department:
      (1)    The following requirements of subsection (a) hereof for flatland subdivisions are applicable to hillside subdivisions: 1309.03(a)(1), (2), (5) and (6).
      (2)    Local streets: forty feet wide.
      (3)    Minor streets and dead-end streets: forty feet wide, except that thirty or thirty-five feet may be acceptable where lots are platted on one side of the street only. All dead-end streets shall terminate in a circular turn-around having a minimum right-of-way diameter of seventy feet, unless the Department approves a "T" or "Y" shaped, paved space in place of the required turning circle.
         (Ord. A-1090. Passed 4-4-67; Ord. A-3167. Passed 3-23-76.)