(A) (1) The city shall require significant users to provide and operate, at the user's own expense, monitoring facilities to allow inspection, sampling, and flow measurement of the building sewer and/or internal drainage system. The monitoring facility should normally be situated on the user's premises, but the city may, when such a location would be impractical or cause undue hardship on the user, allow the facility to be constructed in a public right-of-way. The Superintendent shall review and approve the location, plans, and specifications for such monitoring facilities and may require them to be constructed to provide for the separate monitoring and sampling of industrial waste and sanitary sewage flows.
(2) There shall be ample room in or near such sampling manhole or facility to allow accurate sampling and preparation of samples for analysis. The facility shall be designed and maintained in a manner such that the safety of city and industrial personnel shall be foremost. The facility, sampling, and measuring equipment shall be maintained at all times in a proper operating condition at the expense of the user.
(3) Whether constructed on public or private property, the sampling and monitoring facilities shall be provided in accordance with the city's requirements and all applicable local construction standards and specifications. Construction shall be completed within 90 days following approval of the location, plans and specifications.
(B) All sampling analyses done in accordance with approved federal EPA procedures by the industrial user during a reporting period shall be submitted to the Superintendent regardless of whether or not that analysis was required by the industrial user's discharge permit.
(C) The industrial user must receive the approval of the Superintendent before changing the sampling point and/or monitoring facilities to be used in all required sampling.
(Ord. 1-1991, passed 6-17-91) Penalty, see § 51.999