§ 71.020 REQUIRED POSITION AND METHOD OF TURNING AT INTERSECTIONS.
   (A)   The driver of a vehicle intending to turn at an intersection shall do so as follows.
      (1)   Both the approach for a right turn and a right turn shall be made as close as practical to the right-hand curb or edge of the roadway.
      (2)   The driver of a vehicle intending to turn left at any intersection shall approach the intersection in the extreme left-hand lane lawfully available to traffic moving in the direction of travel of such vehicle, and after entering the intersection, the left turn shall be made so as to leave the intersection in a lane lawfully available to traffic moving in such direction upon the roadway being entered. Whenever practicable the left turn shall be made in that portion of the intersection to the left of the center of the intersection.
      (3)   The State Department of Transportation and local authorities in their respective jurisdictions may cause official traffic-control devices to be placed within or adjacent to intersections and thereby require and direct that a different course from that specified in this section be traveled by vehicles turning at an intersection, and when such devices are so placed no driver of a vehicle shall turn a vehicle at an intersection other than as directed and required by those devices.
   (B)   Where a special lane for making left turns by drivers proceeding in opposite directions has been indicated by official traffic-control devices.
      (1)   A left turn shall not be made from any other lane.
      (2)   A vehicle shall not be driven in the lane, except when preparing for or making a left turn from or into the roadway or when preparing for or making a U-turn when otherwise permitted by law.
(ILCS Ch. 625, Act 5, § 11-801) (1999 Code, § 71.020) Penalty, see § 71.999