1361.24 BOARDING STANDARDS.
   (a)    General. All windows and doors shall be boarded in an approved manner to prevent entry by unauthorized persons and shall be painted to correspond to the color of the existing structure.
   (b)   Materials.
      (1)   Boarding sheet material. Boarding sheet material shall be minimum 1/2- inch thick wood structural panels complying with the Residential Code of Ohio or Ohio Building Code, whichever applies as well as the codes and provisions adopted therein.
      (2)   Boarding framing material. Boarding framing material shall be minimum nominal 2-inch by 4-inch solid sawn lumber complying with the Residential Code of Ohio or Ohio Building Code, whichever applies as well as the codes and provisions adopted therein.
      (3)   Boarding fasteners. Boarding fasteners shall be minimum 3/8-inch diameter carriage bolts of such a length as required to penetrate the assembly and as required to adequately attach the washers and nuts. Washers and nuts shall comply with the Residential Code of Ohio or Ohio Building Code, whichever applies as well as the codes and provisions adopted therein.
   (c)     Installation. Boarding installation shall be in accordance with Figures A and B below and Section 1361.24 herein.
Figure A. Boarding of Door or Window.
 
 
   (d)   Boarding Sheet Material. The boarding sheet material shall be cut to fit the door or window opening neatly or shall be cut to provide an equal overlap at the perimeter of the door or window.
   (e)   Windows. The window shall be opened to allow the carriage bolt to pass through or the window sash shall be removed and stored. The 2-inch by 4-inch strong back framing material shall be cut minimum 2 inches wider than the window opening and shall be placed on the inside of the window opening 6 inches minimum above the bottom and below the top of the window opening. The framing and boarding shall be predrilled. The assembly shall be aligned and the bolts, washers and nuts shall be installed and secured.
   (f)   Door Walls. The door opening shall be framed with minimum 2-inch by 4-inch framing material secured at the entire perimeter and vertical members at not more than 24 inches on center. Blocking shall also be secured at not more than 48 inches on center vertically. Boarding sheet material shall be secured with screws and nails alternating every 6 inches on center.
   (g)   Doors. Doors shall be secured by the same method as for windows or door openings. One door to the structure shall be available for authorized entry and shall be secured and locked in an approved manner.
(Ord. 36-10. Passed 11-8-10.)