§ 153.414 SIGNS PERMITTED IN COMMERCIAL AND MANUFACTURING DISTRICTS REQUIRING A PERMIT.
   (A)   The regulations set forth in this section shall apply to signs in all commercial and manufacturing districts and such signs shall require a permit.
   (B)   In a commercial or manufacturing district, each business shall be permitted flat or wall on premise signs. Projection of wall signs shall not exceed two feet measured from the face of the building or the face of an awning or canopy. The area of all permanent on premise signs for any single business enterprise may be an area equivalent to 1½ square feet of sign area for each lineal foot of building width, or part of a building, occupied by such enterprise but shall not exceed a maximum area of 200 square feet on each exposed wall.
   (C)   In a commercial or manufacturing district, two off-premises signs with a total area not exceeding 600 square feet may be permitted at a single location. No single off-premises sign shall exceed 1,200 square feet, nor shall off-premises signs visible to approaching traffic have a minimum spacing of less than 200 feet. Off-premises signs shall conform to all applicable yard and height regulations for the appropriate zoning district, except that such signs intended to be viewed from an elevated highway shall be not more than 20 feet above the level of the roadway at its nearest point. Off-premises wall signs shall have all structural and supporting members concealed from view.
(Ord. 8-96, § 701.07, passed 5-20-96; Am. Ord. 44-98, passed 2-1-99; Am. Ord. 33-99, passed 12-7-99; Am. Ord. 09-2022, passed 12-5-22) Penalty, see § 153.999