(a) No vehicle, load, object or structure having a maximum axle load greater than 16,000 pounds when the vehicle is equipped with solid rubber tires shall be operated or moved upon the improved public highways, streets, bridges or culverts. The maximum wheel load of any one wheel of any such vehicle shall not exceed 650 pounds per inch width of tire, measured as prescribed by Section 440.011, nor shall any solid tire of rubber or other resilient material, or any wheel of any such vehicle, be less than one inch thick when measured from the top of the flanges of the tire channel.
(b) The weight of vehicle and load imposed upon the road surface by any two successive axles, spaced four feet or less apart, shall not exceed 19,000 pounds for solid tires; or by any two successive axles spaced more than four feet but less than eight feet apart, shall not exceed 24,000 pounds for solid tires; or by any two successive axles, spaced eight feet or more apart, shall not exceed 28,000 pounds for solid tires; nor shall the total weight of vehicle and load exceed, for solid rubber tires, 28,000 pounds, plus an additional 600 pounds for each foot or fraction thereof of spacing between the front axle and the rearmost axle of the vehicle; nor shall the weight of vehicle and load imposed upon the road surface by any vehicle equipped with solid rubber tires exceed eighty percent of the permissible weight of vehicle and load as provided for pneumatic tires.
(c) Notwithstanding any other provision of law, when a vehicle is towing another vehicle, the drawbar or other connection shall be of a length that will limit the spacing between nearest axles of the respective vehicles to a distance not in excess of twelve feet, six inches. If the provisions of this section are held to exceed the weight limitations or other provisions set forth in the Federal-Aid Highway Act of 1958, 72 Stat. 902, 23 U.S.C. 127, this section shall become null and void to the extent of the inconsistency.
(ORC 5577.041; Ord. 89-58. Passed 10-12-89.)