All installations related to drainage along Village streets must be approved by the
Street Commissioner. The Street Commissioner may modify or revise these requirements based on the prevailing or future conditions.
(a) A permit is required before installing a culvert pipe as shown in Appendix A.
(b) All driveways shall be built over culverts no shorter than 20 feet in length and no less than 12 inches in diameter.
(c) Driveway pipes for commercial and industrial properties shall be 75% of the length of the longest vehicle using the driveway.
(d) Driveway pipes must have approved bulkheads, or head walls installed at the ends of the pipe or leave two feet exposed on both ends.
(e) It is the responsibility of the landowner to purchase the driveway culvert. The installation and fill needed will be done by the landowner or private contractor.
(Res. R-02-004. Passed 2-4-02.)