(A) Description.
(1) This section describes the materials and installation required for storm sewer piping systems.
(2) This section is to be used only when non-water-tight joints will be allowed. Hydrostatic or air testing will not be required for storm sewers unless excessive leakage is suspected.
(3) This specification covers the following types of materials for storm sewers:
(a) Reinforced concrete pipe and fittings;
(b) Polyvinyl chloride pipe (PVC);
(c) Corrugated metal pipe; and
(d) Perforated under drain pipe.
(B) Pipe identification. Each length of pipe shall bear the name of the manufacturer, location of the plant, and the date of manufacture. Each length shall likewise be marked to designate the class or strength of the pipe. The marking shall be made on the exterior or interior of the pipe barrel near the end and shall be plainly visible.
(2004 Code, Art. IV, § A, part 1)