345.29  SAFETY EQUIPMENT FOR MOTORCYCLISTS, MOTORCYCLES, MOTOR-DRIVEN CYCLES AND MOPEDS.
   (a)   No person shall operate or be a passenger on any motorcycle or motor-driven cycle unless he is wearing securely fastened on his head by either a neck or chin strap a protective helmet designed to deflect blows, resist penetration and spread impact forces.  Any helmet worn by an operator or passenger shall meet the current performance specifications established by the American National Standards Institute Standard, Z 90.1, the United States Department of Transportation Federal Motor Vehicle Safety Standard No. 218 or Snell Safety Standards for Protective Headgear for Vehicle Users.
   (b)   No person shall operate or be a passenger on any motorcycle or motor-driven cycle unless he is wearing safety, shatter-resistant eyeglasses (excluding contact lenses), or eyegoggles or face shield that complies with the performance specifications established by the American National Standards Institute for Head, Eye and Respiratory Protection, Z 2.1.  In addition, if any motorcycle, motor-driven cycle or moped is equipped with a windshield or windscreen, the windshield or windscreen shall be constructed of safety, shatter-resistant material that complies with the performance specifications established by Department of Transportation Federal Motor Vehicle Safety Standard No. 205 and American National Standards Institute, Safety Glazing Materials for Glazing Motor Vehicles Operated on Land Highways, Standard Z 26.1.
   (c)   No person shall operate a motorcycle, motor-driven cycle or moped on which the handlebars or grips are more than fifteen inches higher than the uppermost part of the operator's seat when the seat is not depressed in any manner.
   (d)   A person operating a motorcycle, motor-driven cycle or moped shall ride in a seated position facing forward and only upon a permanent operator's seat attached to the vehicle.  No operator shall carry any other person nor shall any other person ride on such a vehicle unless the vehicle is designed to carry more than one person, in which event a passenger may ride behind the operator upon the permanent operator's seat if it is designed for two persons, or upon another seat firmly attached to the vehicle to the rear of the operator's seat and equipped with footrests designed and located for use by the passenger or in a sidecar firmly attached to the vehicle.  No person shall ride sidesaddle on a seat.  An operator may carry as many passengers as there are seats and footrests to accommodate those passengers.  Additional passengers may be carried in a factory produced side car provided that there is one passenger per seat.  Passengers riding in a sidecar shall be restrained by safety belts.
   (e)   Every motorcycle, motor-driven cycle and moped shall be equipped with a rearview mirror affixed to the handlebars or fairings and adjusted so that the operator shall have a clear view of the road and condition of traffic behind him for a distance of at least 200 feet. 
   (f)   (1)   “Autocycle” means a fully or partially enclosed motorcycle that is equipped with safety belts, rollover protection, a rearview mirror, automotive seating, a steering wheel and equipment otherwise required on a motorcycle and which has no more than three wheels in contact with the roadway at any one time. 
(WVaC 17C-1-69)
      (2)   Notwithstanding any provision of this code to the contrary, a person with a valid driver’s license who is operating a fully enclosed autocycle, as defined in subsection (f)(1) hereof, is exempt from the provisions of this section. 
(WVaC 17-C-15-44)