The M-2 Manufacturing District is intended to provide for the same type of manufacturing and fabricating operations and uses as in the M-1 Manufacturing District plus more intensive uses. However, these operations and uses shall be provided in those areas where the relationships to surrounding land use would create fewer problems of compatibility.
(A) Permitted principal uses. Uses permitted in the M-1 District.
(B) Permitted accessory uses.
(1) Enclosed as well as screened open storage of materials other than explosive or flammable materials or substances used in the manufacturing or fabrication process.
(2) Offices normally auxiliary to the principal use.
(3) Garages for the storage of vehicles used in conjunction with the operation of the industrial use.
(4) Off-street parking and loading areas.
(1) Same as in M-1 District.
(2) All manufacturing, fabricating and storage uses not permitted in the M-1 District (except the manufacture or fabrication of explosives, flammable liquids, chemicals and gaseous or vaporous substances) as long as such permitted uses are carried on within a structure or within a screened yard area.
(3) Warehouses and mini-warehouses.
(4) Communications and TV towers may be permitted in M-2 Districts.
(D) Lot, yard and building requirements.
Lot frontage | Minimum 120 ft. |
Lot area | Minimum 40,000 sq. ft. |
Principal Building: | |
Front yard | Minimum 40 ft. |
Side yards | Minimum 10 ft., 40 ft. if abutting a residential district |
Rear yard | Minimum 25 ft. |
Building height | Maximum 40 ft. |
Accessory Buildings: | |
Front yard | Minimum 40 ft. |
Side yards | Minimum 10 ft. |
Rear yard | Minimum 25 ft. |
Percentage of lot coverage | Maximum 45% |
(Ord. 03-2016, passed 7-14-2016)