A. Replacement standards.
1. A protected tree shall be replaced at a ratio of one inch DSH of tree replaced for each inch DSH of tree removed.
B. Replacement equivalents.
1. Trees planted as replacement trees for native Oak trees or native trees shall be the same species as those removed or a species that is acceptable to the director, with consideration given to species diversity.
2. Trees planted as replacement trees for mature trees shall be limited to species that are drought tolerant and ignition-resistant and not deemed to be an invasive species, to the satisfaction of the director.
3. The following equivalent sizes shall be used whenever new trees, or combination thereof, are planted (either on-site or off-site) pursuant to a tree replacement plan:
a. A tree in a 15 gallon container equates to a one inch DSH.
b. A tree in a 24 inch box equates to a two inch DSH.
c. A tree in a 36 inch box or larger equates to a three inch DSH.
C. Security.
1. Security may be required for any tree replacement. The security shall guarantee the tree permittee's compliance with conditions of approval and city provisions regarding tree protection and preservation. Security may also be required at the discretion of the director to insure the completion of any additional work specified as a condition of permit approval or other approvals.
2. The security shall be in the amount of the estimated cost of the required work. The applicant shall include the cost estimate by an Arborist as part of the tree replacement plan. The terms and conditions of the security shall be reviewed and approved by the director prior to approval of the tree replacement plan.
3. Security posted on actual work required shall be maintained for the time period determined by the director.
(Ord. 553-19 § 10, 2019)