§ 152.52 INFORMATION TO BE CONTAINED IN OR DEPICTED ON PRELIMINARY AND FINAL PLATS.

   (A)    The preliminary and final plats shall depict or contain the information indicated in the following table in addition to any other information required in this chapter. An "x" indicates that the information is required.

Information	Preliminary Plat	Final Plat
Title Block containing:	x	x
-Property designation	x	x
-Name of owner	x	x
-Location (including township, county, and state)	x	x
-Date or dates survey was conducted and plat prepared	x	x
-A scale drawing in feet per inch listed in words or figures	x	x
-A bar graph	x	x
-Name, address, registration number, and seal of the Registered Land Surveyor	x	x
The name of the subdivider	x	x
A sketch vicinity map showing the relationship between the proposed subdivision and surrounding area	x	x
Corporate limits, township boundaries, county lines if on the subdivision tract	x	x
The names, addresses, and telephone numbers of all owners, mortgagees, registered land surveyors, land planners, architects, landscape architects, and professional engineers responsible for the subdivision	x	x
The registration numbers and seals of the professional engineers	x	x
Date of plat preparation	x	x
A properly designated North Arrow accurately positioned and designated as magnetic north, true north, or NC grid north	x	x
The boundaries of the tract or portion thereof to be subdivided, distinctly and accurately represented with all bearings and distances shown	x	x
The exact boundary lines of the tract to be subdivided, fully dimensioned by lengths and bearings, and the location of existing boundary lines of adjoining lands		x
The names of owners of adjoining properties	x	x
The names of any adjoining subdivisions of record or proposed and under review	x	x
The zoning classifications of the tract to be subdivided and adjoining properties; the lines of adjoining properties may be stubbed off	x
Existing property lines on the tract to be subdivided and on adjoining properties and land immediately adjoining up to a distance of 25 feet from the external boundaries of the subdivision	x	x
Existing buildings or other structures, water courses, railroads, bridges, culverts, storm drains, both on the land to be subdivided and land immediately adjoining	x	x
Proposed lot lines, lot and block numbers, and approximate dimensions	x
The lots numbered consecutively throughout the subdivision		x
Wooded areas, marshes, swamps, rock outcrops, ponds or lakes, streams or stream beds, and any other natural features affecting the site	x
The exact location of the flood hazard, floodway, and floodway fringe areas from the National Flood Insurance Program or other maps	x	x
Base flood elevation data for subdivisions which contain at least five lots or 50 acres, whichever is less	x	x
The following data concerning streets:
-Proposed streets	x	x
-Existing and platted streets on adjoining properties and in the proposed subdivision	x	x
-Rights-of-way, location, and dimensions	x	x
-Pavement widths	x
-Approximate grades	x
-Design engineering data for all corners and curves	x	x
-Typical street cross-sections	x
-Street names	x	x
-Street maintenance agreement in accordance with § 152.69(A)		x
-Type of street dedication; all streets must be designated either “public” or “private.” Where public streets are involved which will be dedicated to the town, the subdivider must submit all street plans to the Subdivision Administrator for approval prior to preliminary plat approval. Where public streets are involved which will not be dedicated to a municipality, the subdivider must submit the following documents to the N.C. Dept. of Transportation, District Highway Office for review: two complete site layouts, including any future expansion anticipated; horizontal alignment indicating general curve data on site layout plan; vertical alignment indicated by percent grade, PI station and vertical curve length on site plan layout; (the District Engineer may require the plotting of the ground profile and grade line for roads where special conditions or problems exist); typical section indicating the pavement design and width and the slopes, widths, and details for either the curb and gutter or the shoulder and ditch proposed; drainage facilities and drainage areas; vicinity map	x	x
-Where streets are dedicated to the public, but not accepted into a municipal or state system before lots are sold, a statement explaining the status of the street in accordance with § 152.69(B)		x
-A certificate of approval by the N.C. Division of Highways of the plans for public streets located in residential subdivisions subject to G.S. § 136-102.6(g) as being in accordance with the minimum standards of the N.C. Board of Transportation for acceptance of the subdivision street on the State Highway System for maintenance	x	x
-Evidence that the subdivider has obtained approval as required by the N.C. Dept. of Transportation, Division of Highways’ Manual on Driveway Entrance Regulations, if any street is proposed to intersect with a state maintained road	x
The location and dimensions of all:
-Utility and other easements	x	x
-Riding trails	x	x
-Natural buffers	x	x
-Pedestrian or bicycle paths	x	x
-Parks and recreation areas with specific type indicated	x	x
-School sites	x	x
-Areas to be dedicated to or reserved for public use	x	x
-Areas to be used for purposes other than residential with the purpose of each stated	x	x
-The future ownership (dedication or reservation for public use to governmental body, for owners to duly constituted homeowners’ association, or for tenants remaining in subdivider’s ownership) of recreation and open space lands	x
The plans for the following utility layouts, illustrating connections to existing systems, line sizes, the location of fire hydrants, blowoffs, manholes, force mains, and gate valves:
-Sanitary sewers	x
-Storm sewers	x
-Other drainage facilities, if any	x
-Water distribution lines	x
-Natural gas lines	x
-Telephone lines	x
-Electric lines	x
Profiles based upon Mean Sea Level datum for sanitary sewers and storm sewers	x
Site calculations, including:
-Acreage in total tract to be subdivided	x
-Acreage in parks and recreation areas and other nonresidential uses	x
-Total number of parcels created	x
-Acreage in the smallest lot in the subdivision	x
-linear feet in streets	x
The name and location of any property or buildings within the proposed subdivision or within any contiguous property that is located on the U.S. Dept. of Interior’s National Register of Historic Places	x	x
Sufficient engineering data to determine readily and reproduce on the ground every straight or curved line, street line, lot line, right-of-way line, easement line, and setback line, including dimensions, bearings, or deflection angles, radii, central angles, and tangent distance for the center line of curved property lines that are not the boundary line of curved streets. All dimensions shall be measured to the nearest 1/10 of a foot and all angles to the nearest 1/4 of a minute		x
The accurate locations and descriptions of all monuments, markers, and control points		x
A copy of any proposed deed restrictions or similar covenants. The restrictions are mandatory when private recreation areas are established	x	x
A copy of the erosion control plan submitted to the Land Quality Section, N.C. Dept. of Natural Resources and Community Development prior to the commencement of any land disturbing activity whenever the proposed activity is to be undertaken on a tract comprising more than one acre, if more than one contiguous acre is to be uncovered	x
Topographic map with contour intervals of no greater than two feet at a scale of no less than one inch = 100 feet	x
All certifications required in § 152.51		x
Any other information considered by either the subdivider, Planning Board, or the Board of Commissioners to be pertinent to the review of the plat	x	x

 

   (B)    The Planning Board and/or Board of Commissioners may, in its discretion, permit certain items contained in division (A) above to accompany the plat rather than be depicted or contained on the plat itself.

   (C)   Where extensive improvements are constructed as part of the subdivision process, the Planning Board may require the submission of a separate, "as-built" engineering plat which provides details of construction and location of the improvements which have been installed. The engineering plat would be submitted concurrently with the final plat.

(Ord. passed 9-19-1985; Am. Ord. passed 10-7-2019; Am. Ord. passed 6-7-2021)