(A) When serving land zoned for industrial or commercial use, a cul-de-sac shall have a maximum length of 450 feet, measured to the center of a turnaround having a radius of not less than 55 feet for the right-of-way, and 45 feet for the paved area. The required cross-section is shown in standard drawings on file in the office of the City Engineer.
(B) When serving land zoned for residential uses and having a density of more than four dwelling units per acre, a cul-de-sac shall have a maximum length of 700 feet, measured to the center of a turnaround having a radius of not less than 35 feet for the right-of-way, and 30 feet for the paved area. The required cross-section is shown in standard drawings on file in the office of the City Engineer.
(C) (1) When serving land zoned for residential uses and having a density of four dwelling units or less per acre, a cul-de-sac shall have a maximum length of 1,000 feet, measured to the center of the turnaround and in all other respects shall conform to division (B) of this section.
(2) The cul-de-sac shall be used only when it is required for the proper subdivision of land, and provides the necessary requirements for the protection of the health and safety of affected properties. Any design, whether conforming to this section or not, is subject to approval by the City Engineer and Fire Chief.
(`83 Code, § 16.24.150) (Ord. 82-19 § 1 (part), 1982)