4.2.1 RR — RESIDENTIAL, RURAL.
   A.   Intent. The Residential Rural (RR) district is intended to implement the rural land use character area as defined in the Forward Monroe plan. This district is designed to accommodate single family residential development in areas within the City of Monroe which may not be served by public water or sewer and are not appropriate for higher densities and or those areas of a rural nature. RR is intended to allow for single family homes on larger lots and may permit compatible uses as permitted in Section 7: Permissible Uses and Standards.
   B.   Standards. The standards that apply to RR districts, which are intended to protect the character of the rural land use area and promote larger lot single family residential development, are defined in Table 4.2.1. below.
   C.   Density. Maximum permitted density is one (1) dwelling unit per acre.
Table 4.2.1 RR District Development Standards Table
Table 4.2.1 RR District Development Standards Table
Building Height
   Maximum 3 Stories
Density
   Maximum 1 Unit/Acre
Setbacks1
Front (Street)
50'
Side
20' (interior lot)
40' (corner lot)
Rear
25'
Lot
Width
100' Minimum
Area
40,000 Square Feet Minimum
Coverage
30% Maximum
Open Space
N/A
Additional Standards
1 In any area that is located outside of a designated floodplain, but where a stream is located, no building or fill may be located within a distance of the stream bank equal to five times the width of the stream at the top of the bank, or 35 feet on each side, whichever is greater.