§ 151.164 R-M MULTI-FAMILY DWELLING DISTRICT.
   (A)   Purpose. This district is established for moderate density single-family and low density multi- family development of varying types and designs.
   (B)   Permitted uses.
      (1)   Dwellings, attached (including townhouses).
      (2)   Dwellings, duplex, triplex and quadraplex.
      (3)   Dwellings, multi-family.
      (4)   Dwellings, single-family, detached.
      (5)   Quad-unit apartments.
      (6)   Nursery or kindergarten.
      (7)   School.
      (8)   Hospital.
      (9)   Family Care home.
   (C)   Special uses.
      (1)   Private club or lodge;
      (2)   Manufactured home park;
      (3)   Golf Course;
      (4)   Swimming Pool;
      (5)   Utilities;
      (6)   Principal use sign; and
      (7)   Home occupation.
   (D)   Development standards. All uses and structures permitted in the R-M District shall meet the applicable development standards established in this section and all other applicable requirements of these regulations.
      (1)   Dimensional requirements.
         (a)   Minimum lot size - 15,000 square feet.
         (b)   Minimum lot width - 80 feet at the building setback line.
         (c)   Maximum lot size and width - subject to approval of the plot plan.
      (2)   Maximum density.
         (a)   Multi-family, duplexes, quadraplexes, townhomes and condominiums: ten units per acre.
         (b)   Single-family detached: six units per acre.
      (3)   Setback requirements.
         (a)   Front yard setback - 30 feet.
         (b)   Side yard setback - 15 feet.
         (c)   Rear yard setback - 15 feet.
         (d)   Minimum distance between two separate principal buildings - 30 feet.
         (e)   Minimum distance between any point of any principal building and accessory building/structure - ten feet.
      (4)   Other requirements:
         (a)   No more than five dwelling units in any one structure.
         (b)   Maximum height above mean surrounding ground level - 35 feet to the eaves.
         (c)   A minimum of two off-street parking places allocated to each family unit in the complex.
         (d)   All requirements for on-frame manufactured homes and manufactured homes are specified in § 151.197.
   (E)   Dimensional requirements; multiple buildings. When there are two or more principal buildings on a common lot, which has single or multiple ownership, they shall comply with the following requirements:
      (1)   The minimum distance between the closest points of any two principal buildings shall be 30 feet;
      (2)   The minimum distance between any point of a principal building and the nearest property line shall be 15 feet;
      (3)   The minimum distance between any point of any building and any road right-of-way line shall be 30 feet;
      (4)   Accessory buildings/structures shall be located as follows:
         (a)   More than ten feet from any point of any principal building; and
         (b)   More than 75 feet in front of any principal building as determined by the projection of the sidelines of the principal building.
      (5)   A building shall contain a maximum of five dwellings; and
      (6)   Building height shall not exceed 35 feet to the eaves.
   (F)   Dimensional requirements; manufactured homes. All requirements for manufactured homes are specified in § 151.197(E).
(Ord. passed 2-10-2009, § 7.5; Ord. passed 8-12-2014; Ord. passed 7-11-2017; Ord. passed 3-10-2020; Ord. passed 5-10-2022; Ord. passed 7-6-2022, §§ 2.17, 2.28; Ord. passed 2024)