The name of the subdivision shall be printed on the plat in prominent letters, and the following information relating to the position and location of the subdivision shall be shown thereon:
(A) The location of the subdivision by government lot, recorded private claim, quarter section, section, township, range and county noted immediately under the name given the subdivision;
(B) The exact location of the subdivision, indicated by distances and bearings with reference to a corner or corners established in the U.S. Public Land Survey;
(C) A small drawing of the section, or governmental subdivision of the section, in which the subdivision lies with the location of the subdivision indicated thereon. This drawing shall be oriented on the sheet in the same direction as the main drawing. The subdivider shall indicate his or her future intent regarding unsubdivided acreage within his or her control or ownership;
(D) Where provision is made for access to any lake or stream, the plat shall show the area over which access is provided to the lake or stream together with a small-scale drawing clearly indicating the location of the subdivision in relation to the lake or stream and the location of the area over which access is provided;
(E) The name of adjoining streets, state highways and subdivisions shown in their proper location underscored by a dotted line; and
(F) Abutting street and state highway lines of aborning plats shown in their proper location by dotted lines. The width of these streets and highways shall be given also.
(Ord. 1999-2, Subdivisions § 7, subs. .060, passed 2-15-1999)