(A) Plans, profiles, and details shall be legibly drawn, printed, or reproduced on 24 × 36-inch sheets. A border shall be made on each sheet providing ½-inch at top, bottom, and right side and 1½- inches on the left side.
(B) A suitable title block 7½ × 3¾-inches shall be placed in the lower right corner or along the right edge and provide adequate surface for approval by the City Engineer and for approval of plan revision.
(C) Plan and profiles shall be drawn to the scale of one inch = 40 feet or larger unless approved by the City Engineer. Details shall be drawn to such scale that clearly shows the facility being constructed. The scales for various portions of the plans shall be shown on each sheet.
(D) A vicinity map shall be shown on the first sheet of all sets of plans.
(E) A north arrow shall be shown on each sheet when applicable.
(F) Plans shall be laid out to orient north to the top or right edge of the sheet unless approved otherwise by the City Engineer.
(G) All lettering shall be -inch minimum.
(H) If the plans include three or more sheets, a cover sheet showing the streets, lots, easements, storm drains, index, and vicinity map shall be included.
(I) The form of all plans shall conform to such additional requirements as may be established by the City Engineer. The final form of all plans shall be as approved by the City Engineer.
('61 Code, § 10-2.706.2) (Ord. 252 C.S., passed 8-3-81)