(A) It shall be the duty of each installer to insure the culvert or drain is of sufficient capacity and in the proper location. The driveway surface shall be level or slope away from the elevation of the street at the intersection of the driveway with the street to the existing right-of-way line. It is recommended that parties request the advice of the Town Building Department before making said installation and should such facility be inadequate or require replacements it shall be the obligation of the party using the driveway entrance and shall in no way be any liability or an obligation of the town. The replacement of any driveway culverts shall be at the owner a expense, except where replacement shall be at the convenience of the town due to reconstruction of the street.
(B) In addition to the provisions of division (A) above, the following specifications shall apply: It shall be permissible to install Class 3 reinforced concrete pipe, SDR 35 PVC sewer pipe, except under driveways, or other approved pipe having sufficient strength and a smooth interior with a minimum diameter of 12 inches below the surface of the pavement adjacent to the pipe.
('80 Code, § 15.24.030) Penalty, see § 10.99