(A) No service connection or other attachments to any of the water mains shall be made except by heavy brass corporation stops or saddles. All service shall be constructed as specified by the town's construction specifications and contractor's handbook. All services shall have a separate curb valve for each residence. All residences shall have a valve before and after the meter as the service enters the crawl space, basement, or slab of the residence or structure and a curb valve located at the property line.
(B) The valves shall be placed before and after the meter connection; the valves shall be located at a point immediately after the service enters the building and before any other connections are made to the service line. All curb valves shall be located at the easement. At no time shall service curb valves be placed on private property. Placement of curb valves shall be determined by the administrative authority.
(C) In all cases, service connection requirements shall be as described in water utility's construction specifications and contractor's handbook. Any deviation or clarification of information will be made by the town's administrative authority. Any deviation or change which does not comply with the handbook or the administrative authority and is installed without permission of the administrative authority will be subject to correction at the owner's/contractor's expense. Water service may be discontinued until the deviations are rectified.
('80 Code, §13.12.020) Penalty, see § 52.999