All the following utility improvements shall be installed prior to street construction and shall meet the following standards:
(a) Water. All subdivisions shall have City water for domestic use and fire protection. Adequate size water mains, pumping stations and appurtenances properly connected to the public water supply system shall be provided in accordance with the specifications established by the City Engineer and adopted by Council. One-inch copper water service shall be installed to the property line of each residential lot platted along with a curb stop and shut-off box..
(b) Storm Sewers. Proper and adequate disposal of storm water shall be provided. The type, extent, location and capacity of drainage facilities shall meet the design standards adopted by Council. All surface drainage facilities shall connect to an adequate drainage course. Land that is subject to flooding from time to time shall be provided with such improvements as may be required to remove flooding hazards from proposed subdivision lots.
(c) Sanitary Sewers. Sanitary sewers, pumping stations and appurtenances shall be installed in all subdivisions according to municipal standards and requirements. At least one lateral shall be installed to the property line of each lot platted. These laterals shall be sealed in accordance with the requirements of the City Engineer until used.
Utilities to be located in street right of way shall be placed in the ground before any pavement is constructed in the proposed street, unless otherwise provided for by joint agreement of the City Engineer and the utility company.