The tentative map shall show and contain the following information:
(A) A tract number and name, if any;
(B) Date of preparation, north point and scale;
(C) Name, address and telephone number of the subdivider; the record owner, and the person or persons preparing the map;
(D) A sufficient legal description of the land to define the boundaries of the proposed tract;
(E) A site location map where necessary to locate the tract;
(F) Approximate ties to section corner or other known point;
(G) The boundary lines of the subdivision to be shown as required on the final map;
(H) The approximate layout, dimensions and number of lots;
(I) Approximate acreage of the subdivision;
(J) Ownership division lines of abutting properties as shown on the latest assessor’s parcel map and tract number and name, if any, of adjoining subdivisions;
(K) Identification of lots in the proposed subdivision as to the existing and proposed use; if property is to be used for more than one purpose, the area, lot or lots proposed for each type of use shall be shown identification of proposed public uses, if any;
(L) The approximate location of trees and the location and outline to scale of buildings and structures and a description of their proposed disposition;
(M) The location, names and existing right-of-way widths of all adjoining highways, roads and alleys. The centerline and gutter line elevations of the adjoining streets shall be shown at every change in grade;
(N) The location, widths and approximate gradients of all highways, roads and alleys proposed within the tract;
(O) Each road shown by its actual name or by a temporary name or letter for purposes of identification until the proper name of such road is determined;
(P) The approximate radii of all curves;
(Q) Location of marginal or dividing strips, if any;
(R) The widths and approximate locations of all existing or proposed easements or right-of-way within the subdivision or along its boundaries, whether public or private, for roads, railroads, drainage, stormwater, irrigation canals, sewers or public utility purposes;
(S) Accurate contours shall be shown drawn to intervals prescribed in the city standards adopted by the City Council. Said contours shall be extended into adjacent property a sufficient distance to establish proper topographical relationships;
(T) Approximate location of all areas subject to inundation or stormwater overflow, and the locations, widths and direction of flow of all watercourses;
(U) Proposed surface water drainage flow;
(V) Elevation of existing sewer lines at points or proposed connection;
(W) The source of water supply and the lot to be used for the community water supply, if any;
(X) Proposed phasing of development; and
(Y) At least two reference point ties to the California State Plane Coordinate System (1983 NA datum) shall be shown on the map, if available within one mile of the subdivision. If the distance is greater than one mile, a record tie to a section line or quarter section line and from a section corner or quarter section corner shall be shown on the map and the distance from a point on the outer line of a subdivision to a point on a section line or the angle between the tie line and the section line upon which the control point falls.
(Ord. 295, passed 2-4-1986; Ord. 387, passed 11-20-1990)