(A) Sign area. The aggregate sign area for lots of M-1 and M-2 Zones shall not exceed one-half of a square foot per foot of lot frontage. The signs enumerated below shall be subject to the total sign area.
(B) Identification sign. One freestanding identification sign shall be permitted for each lot on each street frontage. The maximum size of said sign shall be 100 square feet per display face, and shall not exceed a height of 30 feet. The sign may be illuminated.
(C) Wall signs. One wall sign shall be permitted for each lot on each street frontage. The maximum size of said sign shall be 20% of the building facade on which it is to be attached. The sign may be illuminated.
(D) Multi-occupant complex.
1. One freestanding identification sign which conforms to subsection (A) of this section shall be permitted per street frontage. The sign may list the names of the occupants within its surface.
2. Each industrial suite within the building shall be allowed to install two identification signs adjacent to the large rollup door totaling 40 square feet maximum and may list the name of the business and a logo, and one sign on the main entrance door of each suite, which shall total four square feet maximum and may contain the business name, hours of operation and/or telephone number.
3. Required signage by the state for regulated businesses may be located inside windows or near the main entrance door. These signs shall be unlighted and lie flat against the building/door.
(a) Such signs shall not be included in the total sign aggregate for the parcel.
(b) An overall site and design scheme (signage master plan) shall be coordinated to review the size and colors of all the signage, and the illumination of the freestanding sign.
(Ord. 596, passed 10-18-2011; Ord. 612, passed 4-1-2014)