The following requirements are applicable to all subdivisions within the jurisdiction of the commission:
(A) The size, shape and orientation of lots shall be appropriate for the location of the proposed subdivision and for the type of development contemplated.
(B) Excessive depth in relation to widths shall be avoided. A proportion of not more than three to one (3:1) normally shall be considered appropriate.
(C) Every lot shall abut on a street. Lots for residential purposes shall meet the size requirements of the zoning regulations of the village and also the requirements relative to building setback and side yard requirements.
(D) Corner lots for residential use shall be platted at least twenty percent (20%) wider than interior lots in order to permit conformance with the setback required by the zoning regulations on the side streets.
(E) Residential lots fronting on arterial and collector streets should have extra depths to permit deep setback for the buildings.
(F) Double frontage lots and reversed frontage lots shall not be platted except as hereinbefore permitted under subsection 6-4-8(J) of this chapter.
(G) Side lot lines shall be approximately at right angles to the right of way line of the street on which the lot fronts. (Ord. 365, 11-3-1970; amd. 1979 Code)