The following table establishes the lot and building standards for each residential district. Building standards apply to both principal and accessory buildings. Please refer to Chapter 20 of this Zoning Ordinance for rules of measurements.
Lot and Building Standards | R-1 | R-1A | R-2 | R-3 | R-4 |
Lot and Building Standards | R-1 | R-1A | R-2 | R-3 | R-4 |
Minimum Lot Area (sq. ft.) | 20,000 | 15,000 | 10,000 | 10,000 | 15,000 |
Minimum Lot Frontage (feet) | 100 | 100 | 75 | 75 | 100 |
Maximum Lot Coverage (%) | 34 | 34 | 34 | 40 | 50 |
Minimum Setbacks (feet) | |||||
Front Street [4] | 40 | 40 | 35 | 30 | 35 |
Side Street [4] | 20 | 20 | 15 | 15 | 17.5 |
Side | 10 | 10 | 10[1] | 10 | 10/30[2] |
Rear Principal | 20 | 20 | 20 | 20 | 35 |
Rear Accessory | 10 | 10 | 10 | 10 | 10 |
Building to Building[3] | None | None | None | 20 | 30 |
Maximum Building Heights (feet) | |||||
Principal Building | 35 | 35 | 35 | 35 | 50 |
Accessory Building | 15 | 15 | 15 | 15 | 15 |
[1] 7 ft. for any lot or zoning lots of record having a lot frontage of 60 feet or less.
[2] Minimum side setback is 10 feet for buildings up to 35 feet in height; 30 feet for buildings above 35 feet in height.
[3] The building to building setback establishes principal building spacing requirements in duplex, townhouse, and multi-unit building developments.
[4] Accessory buildings are not permitted in front street yard and side street yard.
(Ord. 2021-4931, 11-15-2021)