(A) Requirements of discharger. Each discharger shall provide and operate at the discharger's own expense, a monitoring facility to allow inspection, sampling and flow measurement of each sewer discharge to the Authority. Each discharger facility shall be situated on the discharger's premises, except where such a location would be impractical or cause undue hardship on the discharger, the Authority may concur with the facility being constructed in the public street or sidewalk area providing that the facility is located so that it will not be obstructed by landscaping or parked vehicles. There shall be ample room in or near the sampling facility to allow accurate sampling and preparation of samples for analysis. The facility, sampling and measuring equipment shall be maintained at all times in a safe and proper operating condition at the expense of the discharger. All monitoring facilities shall be constructed and maintained in accordance with all applicable local construction standards and specifications. Construction shall be completed within 120 days of receipt of permit by the discharger.
(B) Inspection and access. All sewers shall have an inspection and sampling manhole or structure with an opening of no less than 24 inches in diameter and an internal diameter of no less than 36 inches containing flow measuring, recording and sampling equipment as required by the Authority to assure compliance with this chapter.
(Ord. 733, passed 12-10-2007)