§ 153.032  M-2 HEAVY INDUSTRIAL DISTRICT.
   (A)   Application of section. The regulations set forth in this section, or set forth elsewhere in this chapter, when referred to in this section, are the regulations in the M-2 Heavy Industrial District.
(1963 Code, § 10-11-1)
   (B)   Use regulations.  Any building or premises may be used for any purpose not in conflict with any provision of this code regulating nuisances; provided, however, that no building shall be erected, reconstructed, or structurally altered for residential purposes, except for resident watchmen and caretakers employed on the premises; and provided further, that no building or occupancy permit shall be issued for any of the following uses until and unless the location of such use shall have been approved by the City Council after report by the Department of Public Works and the Chief of the Fire Department:
      (1)   Acid manufacture;
      (2)   Cement, lime, gypsum, or plaster of paris manufacture;
      (3)   Distillation of bones and glue manufacture;
      (4)   Explosives manufacture or storage;
      (5)   Fat rendering and fertilizer manufacture;
      (6)   Garbage, offal, or dead animal reduction or dumping;
      (7)   Refining of petroleum or its products;
      (8)   Smelting of tin, copper, zinc, or iron ores;
      (9)   Stockyards or slaughter of animals;
      (10)   A body piercing and/or tattoo establishment and/or business subject to and provided that regarding the subject premises, there shall have been granted and allowed a special use permit regarding the use and operation of a body piercing and/or tattoo business on the premises.
(1963 Code, § 10-11-2)
   (C)   Height and area regulations.  The height and area regulations set forth in §§ 153.045 and 153.046 shall be observed.
(1963 Code, § 10-11-3)
   (D)   Parking and loading regulations.  Off-street parking and loading spaces shall be provided in accordance with the requirements for specific uses set forth in §§ 153.060 through 153.064.
(1963 Code, § 10-11-4)  (Ord. 590, passed 6-26-1958; Am. Ord. 2234, passed 6-14-2010)