1135.02 ADVANCED MANUFACTURING DISTRICT (AM).
   (a)   Purpose.
          To broaden the economic development opportunities of the City of Lancaster by creating development standards that will promote innovation and employment opportunities.
          To promote advanced manufacturing, research and development opportunities, logistics and other similar businesses that support the supply chains serving existing or evolving industry clusters in the Columbus region.
          To improve pedestrian connectivity of workforce areas to residential neighborhoods.
   (b)   Target Areas.
   (c)   Permitted, Special Exception, and Accessory Uses. See Section 1125.03 - Permitted, Special Exception, and Accessory Uses for each District.
   (d)   Lot Area, Setback, Height, and Lot Coverage Requirements.
Development Standards
Advanced Manufacturing
Minimum Lot Size (Sq. Ft.)
None
Minimum Frontage (Feet)
100
Minimum Front Setback (Feet)
100
Minimum Side Setback (Feet)
One (1) foot setback per one (1) foot of building height. When a side or rear lot line abuts an existing residential use or District that permits single unit dwellings, then a buffer shall be provided in accordance with Section 1141.10.
Minimum Rear Setback (Feet)
One (1) foot setback per one (1) foot of building height. When a side or rear lot line abuts an existing residential use or District that permits single unit dwellings, then a buffer shall be provided in accordance with Section 1141.10.
Maximum Height (Feet)
No maximum height
Maximum Lot Coverage (Percent)
80
   (e)   Example Lot Layout and Rendering.
   (f)   General Development Regulations.
 
Applicable
Section
Reference
Notes
Accessory Structures
Y
Section
Detached Accessory Structures may encroach a side or rear setback but shall be no closer than five (5) feet from the side or rear lot line. Accessory structures shall also comply with all other requirements in Section 1147.02 .
Fences
Y
Section
Fences and walls may be placed in a required minimum setback provided they comply with Section 1147.05 .
Landscaping/
Buffering
Y
Chapter
Plant material and berms may be placed in the required setbacks provided they do not constitute a nuisance as provided in the Lancaster Codified Ordinances.
Parking
Y
Chapter
Parking may encroach a front, side or rear setback provided the parking is no closer than five feet from said lot line.
Signs
Y
Chapter
Signs, provided they comply with Chapter 1145 , may be located in a front setback.
(Ord. 15-23. Passed 8-14-23.)