(A) The Manager is authorized to establish local limits pursuant to 40 CFR 403.5(c).
(B) (1) The following pollutant limits are established to protect against pass through and interference. No person shall discharge wastewater containing in excess of the following daily maximum limit.
300 mg/l BODs
800 mg/l COD
2.0 mg/l cyanide
100 mg/l oil and/or grease
250 mg/l total suspended solids
(2) The above limits apply at the point where the wastewater is discharged to the POTW. All concentrations for metallic substances are for total metal unless indicated otherwise. The Manager may impose mass limitations in addition to the concentration-based limitations above.
(C) The Manager may develop best management practices (BMPs), by ordinance or in individual wastewater discharge permits, to implement local limits and the requirements of § 54.010.
(Ord. 2012-06, passed 4--12)