(A) The subdivider shall submit a plan, profile, and cross sections for each proposed street in the subdivision. Water and sewer mains, with grades and pipe sizes, shall normally be shown on the same tracing; however, the Commission may require water and sewer mains to be shown on separate plan and profile sheets. A scale of one inch equal to 50 feet for plans and one inch equal to five feet for profiles shall be maintained unless otherwise authorized by the Commission. A sheet size of 24 inches by 36 inches drawn with reproducible ink or pencil shall be used.
(B) The plan shall show:
(1) Right-of-way lines of thoroughfares, streets, alleys and easements, and location of street and surface therein;
(2) Centerlines of thoroughfares, streets and easements;
(3) Data on the location, length, and bearings of all lines, including length of radii, arcs, tangents and curves; (Central angles and street curves may be referred to a curve table.)
(4) Location of storm and sanitary sewers and water mains, and items that pertain thereto, i.e., manholes, hydrants, valves, etc; and
(5) The Village Council requires, in addition to all the above, the location of all existing buried utilities, including, but not limited to, sanitary, storm, water, gas, electric, telephone, cable, steam, chilled water, etc. All existing buried utility lines should be accurately marked concerning line sizes and types.
(C) The profile shall show:
(1) Centerline elevations, percent of grade, and location and length of vertical curves on streets to the right-of-way limits;
(2) Elevations shall be based on U.S. Geodetic Survey Datum and permanent bench marks wherever possible;
(3) Plans shall contain profiles and typical cross-sections for all open drainage channels; and
(4) The Village Council requires, in addition to all the above, to show the location of all existing buried utilities that either parallel the proposed utility lines within 5'-0 c/c or that intersect proposed utility lines.
(Ord. 537, passed 7-19-90)