Any tower mounted or building mounted wind energy system which is 35 feet or less in total height shall be a by-right use in all zoning districts, subject to the requirements of Section 1287.03 and the following:
(a) Permit Required. A zoning permit shall be obtained from the City to construct and operate any tower mounted or building mounted wind energy system which is 35 feet or less in total height. The total height of a wind energy system shall be as defined in Section 1284.02. Any wind energy system which is greater than 35 feet in total height shall be required to obtain a special land use permit as set forth in Section 1287.05 herein.
(b) Permit Contents. The following information is required upon submitting an application for a zoning permit for a wind energy system:
(1) Name of the property owner(s) and address.
(2) An accurate drawing showing the proposed location of the wind energy system, property lines, existing building(s), proposed wind energy system setback, right-of-way lines, public easements and overhead utility lines and the distance from the wind energy system to principal buildings on adjacent lots.
(3) The proposed type and height of the wind energy system to be constructed, including the manufacturer and model, product specifications including maximum noise output (measured in decibels), total rated generated capacity, dimensions, rotor diameter, and a description of ancillary functions.
(4) If the applicant intends to install an interconnected wind energy system, the applicant must provide documentation that the applicable utility company has or will approve the proposed interconnection.
(5) Other relevant information as may be reasonably requested by the Community Development Director.
(c) Final Approval. Final approval shall be issued after and inspection of the wind energy system by the City or an authorized agent of the City, and where the inspection finds that the wind energy system complies with the requirements of Sections 1287.03 and 1287.04, all applicable State construction and electrical codes, local building permit requirements, and all manufacturers' installation instructions.
(Ord. 475. Passed 5-4-10.)