(A) Information required. Each registrant and permittee shall provide mapping information required by the city in accordance with Minnesota Rules 7819.4000 and 7819.4100. Within 90 days following completion of any work pursuant to a permit, the permittee shall provide the City Engineer accurate maps and drawings certifying the "as-built" location of all equipment installed, owned and maintained by the permittee. Such maps and drawings shall include the horizontal and vertical location of all facilities and equipment and shall be provided consistent with the city's electronic mapping system, when practical or as a condition imposed by the City Engineer. Failure to provide maps and drawings pursuant to this division shall be grounds for revoking the permit holder's registration.
(B) Service laterals. All permits issued for the installation or repair of service laterals, other than minor repairs as defined in Minnesota Rules 7560.0150, Subpart 2, shall require the permittee's use of appropriate means of establishing the horizontal locations of installed service laterals and the service lateral vertical locations in those cases where the City Engineer reasonably requires it. Permittees or their subcontractors shall submit to the City Engineer evidence satisfactory to the City Engineer of the installed service lateral locations. Compliance with this chapter and with applicable Gopher State One Call law and Minnesota Rules governing service laterals installed after December 31, 2005 shall be a condition of any city approval necessary for:
(1) Payments to contractors working on a public improvement project including those under M.S. Ch. 429; and
(2) City approval under development agreements or other subdivision or site plan approval under M.S. Ch. 462. The City Engineer shall reasonably determine the appropriate method of providing such information to the city. Failure to provide prompt and accurate information on the service laterals installed may result in the revocation of the permit issued for the work or future permits to the offending permittee or its subcontractors.
(Ord. 18-0783, passed 6-26-2018; Ord. 19-796, passed 3-26-2019)