1022.04   ANTENNAS.
   (a)   Antennas and accessory equipment must be capable of fitting inside an enclosure not larger than six cubic feet in volume.
   (b)   Antennas and accessory equipment shall not increase the overall height of an existing wireless support structure with such antennas and accessory equipment by more than five feet; provided, however, that the permissible increase in height resulting from collocation or installation of a small wireless facility on a wireless support structure shall be as provided in Section 1022.01(b)(13).
   (c)   Antennas mounted on a wireless support structure shall be enclosed inside the wireless support structure whenever possible and otherwise within a canister, shroud, or other enclosure. All accessory equipment associated with the antennas shall be concealed and shall not visibly protrude from the shroud or canister.
   (d)   The width of the canister or other shroud encasing the antennas and accessory equipment shall not exceed the width of the narrowest portion of the wireless support structure.
   (e)   The enclosure or shroud shall be painted to match or complement the wireless support structure.
   (f)   Antennas shall be installed in a manner that minimizes the visual impact to the general public.
   (g)   Antennas shall not impair light or views from adjacent window(s).
   (h)   Antennas located on the exterior of a wireless support structure shall be top-mounted on a wireless support structure. The City may approve a side-mounted antenna if, in the City's discretion, the side-mounted antenna would be more appropriate given the built environment, neighborhood character, overall site appearance or would promote the purposes in these design guidelines.
(Ord. 18-82.  Passed 7-24-18; Ord. 19-26.  Passed 2-19-19.)