Additional information and requirements are as follows:
A. Boundary line of proposed subdivision indicated by solid heavy lines and the total acreage encompassed thereby. The plat shall clearly indicate all streets, alleys, blocks, lots, parcels, easements, and rights-of-way. Accurate angular and lineal dimensions shall be shown to describe and/or reproduce any of these features;
B. The description and location of all subdivision and public land system survey monuments;
C. A consecutive numbering system for all lots and blocks;
D. Location and names of all existing or prior platted streets or other public ways, railroad and utility rights-of-way, parks and other public open spaces, permanent easements or prior platted lots within and adjacent to the subdivision;
E. A graphic representation of the minimum setback lines on all lots and parcels, and a notation of the distance between such lines and the street line, or lot line;
F. Pipes or other equivalent physical markers shall be placed at each lot corner. No pipe monument shall be less than three-quarter-inch in diameter, IPS weight water pipe at least thirty inches long or one-half inch, No. 4 reinforcement bars. Iron pipes or one-half inch No. 4 reinforcement bars encased in concrete at least four inches by four inches by thirty inches shall be placed at the beginning and ending of all curves and at all block corners.
(Ord. 81-10 § 5.3, 1980).