All roadways within the boundaries of a mobile home park shall have minimum widths, and contain improvements located therein, in accordance with the following:
(a) Minimum widths shall be:
Improved if Parking Permitted on: | ||||
Type of Roadway | Total Width (ft.) | Improved Width if Parking is Not Permitted (ft.) | One Side Only (ft.) | Both Sides (ft.) |
Collector | 60 | 30 | 38 | 46 |
Local Access, 2 way | 50 | 24 | 32 | 40 |
Local Access, 1 way | 50 | 20 | 28 | 36 |
(b) The improved width shall be constructed of asphaltic concrete or Portland cement concrete.
(c) Curbs and gutters, made of Portland cement concrete, shall be required along each side of the improved portion whenever such improved portion has a required width of thirty feet or more. Such curbs and gutters shall be of the integral type.
(d) Improved roadways with a required width of less than thirty feet may be of the V section type, or the crown type with curbs and gutters each side, whichever is preferred by the developer.
(e) Local access one-way roadways shall be limited to:
(1) A maximum length of not more than 500 feet.
(2) Any single roadway shall serve not more than twenty-five mobile home sites.
(3) The total lineal length of all one-way roadways within a mobile home park shall not exceed fifty percent (50%) of the total lineal length of all roadways of all types within the park.
(f) No portion of any roadway located between the improved portion and the boundary lines of the roadway shall be used for any purpose other than sidewalks, driveways, lawns, the planting of shrubbery or the installation of street lights and underground utility lines.
(g) The design and improvement of all proposed roadways shall be subject to the approval of the City Engineer and the Division of Streets.
(Ord. 33-72. Passed 8-7-72.)