(A) Authority. This section is adopted pursuant to G.S. § 153A-275, which statute permits a county by ordinance to adopt reasonable rules and regulations to protect and regulate a public enterprise belonging to or operated by it.
(B) Purpose. The purpose of this section is to establish rules and regulations which are minimum standards for the construction of the location or hangars at the Harnett County Airport.
(C) Compliance with laws and regulations; permits. Each hangar constructed or located at Harnett County Airport shall comply with all federal, state, county, and local building codes and other regulations pertaining thereto, including electrical and plumbing codes, if applicable. Permits may be obtained through the county’s Inspection Department upon compliance with all applicable laws.
(D) Design approval. A complete set of floor plan drawings and specifications for any hangar construction proposed at Harnett County Airport shall be submitted to the Airport Committee for review and approval of design.
(E) Materials. All hangars will be constructed of metal or masonry materials or a combination of the two with an exterior light green color. Floor areas of hangars shall be concrete or asphalt, except, however, if concrete runners are used for the wheel areas, the remaining area of the floor may be a compacted surface.
(F) Size. Each hangar constructed will be sufficient in size to fully enclose within its lateral limits each aircraft using the facility.
(Ord. passed 8-3-1981)