All electrical installations shall comply with the following, where applicable.
(A) Motors of 20 HP or more must have line compensators on same; provided, however, that the city may, at its option, make an exception if the total connected motor load required is smaller than the consumer connected load, and the motor starting current is less than the current corresponding to the consumer’s total connected load.
(B) Any establishment having a total motor load of 125 HP or more is required to have 440 volts for its motor load.
(C) All motor installations of 5 HP or less shall be supplied with 240 volt single phase energy except: motors of 1/2 HP or smaller may be 120 volt; or three-phase motors of 3 HP or more may be served from existing secondary power circuits where only service wires and meters are required.
(D) The city shall make an installation charge for extraordinary expenses required by a consumer.
(2003 Code, § 3.40-2) Penalty, see § 10.99